The following table lists all available functions and operations of the product.

1. Connect your phone to the hardware's Wi-Fi (password: 12345678)
2. Open a browser and enter 192.168.43.1 to access the backend
3. Go to the video tutorial: Download

The following is an interactive simulation of the mobile app interface. Use the bottom navigation to switch between different modules.

1. Phone upgrade hardware tutorial: Download
2. Debug page upgrade tutorial: Download
3. USB upgrade hardware tutorial: Download

Check iPhone's side:

1. Please check both of your Wi-Fi and Bluetooth remains open, and disconnect any devices that are already connected.
2. Make sure your iPhone's personal hotspot is OFF.
3. Please go to Settings > General > Carplay > My Car, make sure the device you recognized is ON.
4. Change an iPhone to test.

Check CCB's side:

1. Please re-plug the dongle, and try connection.
2. Use your phone to forget dongle's bluetooth, and reconnect.
3. Restart the vehicle.

1. This is normal, reconnect after leaving the place.
2. Refresh phone's cellular data.

1. Go to phone's Debug page > Settings > Turn off GPS.
2. Restart the phone.

For company's computer with restrictions, please contact the IT department to unlock USB debugging mode.

• Global After-Sales Support Contact:

duxuan@chinadfm.com

aizihaier@chinadfm.com

• Business Hours: Monday to Friday UTC+8 9:00 AM - 6:00 PM

1. Enter the Head Unit Settings interface and enable the ADB switch (method to access ADB settings depends on the car model).
2. Open the platform-tools directory on your computer, type cmd in the address bar, and press Enter.
3. Connect the Head Unit and Computer using a USB Male-to-Male Cable.
4. Check if the Head Unit address is obtained:
   📋 Copyadb devices
5. Execute the following commands sequentially:
   📋 Copyadb root
   📋 Copyadb remount
6. Install the APK (ensure APK is in the correct path):
   📋 Copyadb install com.bz.CA08.Adapter.apk
7. Launch the software main interface:
   📋 Copyadb shell am start -n com.bz.CA08.Adapter/cn.manstep.phonemirrorBox.MainActivity
8. If you need to enable the software floating ball: Click Settings (bottom right) → Advanced Settings → Quick ball.
9. Enter the Head Unit Settings interface and disable the ADB switch.
10. Plug in the CCB to use.

1. Insert the installation USB drive into your computer. Copy the installation file into the USB drive and rename it to: com.bz.CA08.Adapter.apk
2. Insert the USB drive into the corresponding USB port on the Head Unit.
3. Wait for installation to complete. The software icon will appear on the Head Unit desktop.
4. Remove the USB drive, plug in the CCB, and it is ready to use.

Download the hardware upgrade package below:

Download

Please read the following terms carefully before using this product. Using this product indicates that you have read, understood, and agree to be bound by all terms below.

1.1 The company is not responsible for data recovery or any losses resulting from data loss, damage, or inability to recover due to product repair, upgrade, reset, or failure.

1.2 Users should regularly backup important data. Risks of data loss due to failure to backup are borne by the user.

1.3 It is recommended to backup data before sending for repair, or choose the company's data protection service (if available).

2.1 Indirect losses such as business interruption, profit loss, or reputation damage caused by product failure, downtime, repair, or upgrade are not within the company's compensation scope.

2.2 The company's maximum liability shall not exceed the product purchase price or repair cost.

2.3 For critical business scenarios, users are advised to configure redundant systems or backup solutions to reduce risks.

3.1 Users should use the product correctly according to this manual. Damage caused by improper operation, misuse, or abuse is not covered under warranty.

3.2 Unauthorized modification, disassembly, or repair may cause product damage or safety hazards. Consequences are borne by the user.

3.3 This product is not suitable for critical scenarios involving personal safety. Please contact the company separately for such use cases.

4.1 The company reserves the final right to interpret and modify after-sales service policies, warranty terms, fee standards, etc.

4.2 Policy changes will be notified to users through official website, email, or other methods. Changed policies take effect from the date of publication.

4.3 If users disagree with the changed policies, they may stop using the product or service. Continued use indicates acceptance of changes.

5.1 All trademarks, patents, copyrights, trade secrets, and other intellectual property rights involved in this manual and product belong to the company.

5.2 Without written permission, users may not copy, distribute, or modify the content of this manual.

5.3 The content of this manual is for reference only. Please refer to the latest version for updates.

6.1 This manual may contain links to third-party websites or services. The company is not responsible for the accuracy, legality, or security of third-party content.

6.2 Users access third-party links at their own risk. It is recommended to read third-party privacy policies and terms of use.

7.1 The company is not responsible for service interruption or data loss caused by force majeure factors such as natural disasters, war, strikes, government actions, cyber attacks, or power outages.

7.2 After a force majeure event, the company will make every effort to reduce losses and restore services promptly.

8.1 This disclaimer and related legal terms are governed by the laws of China.

8.2 Any disputes arising from this product or service shall be resolved through friendly negotiation. If negotiation fails, submit to the competent people's court in Wuhan for litigation.

8.3 If any provision of this disclaimer is deemed invalid or unenforceable, it does not affect the validity of other provisions.

This template is for reference only. Before formal use, please have it reviewed by the company's legal department and adjust according to local laws and company circumstances.

Provide practical tools for users and after-sales personnel to quickly reference and use.